 |
Share Com Port |
 |
| Serial Port Splitter 3.8.2 |
|
Serial Port Splitter allows to share dataflow of one COM port between several applications or vice versa to join dataflow of several COM port devices to one application. Such program universality is achieved by means of virtual serial ports technologies. Moreover Serial Port Splitter allows to setup READ/WRITE or READ ONLY mode for splitted ports and READ/WRITE or WRITE ONLY mode for joined serial ports.
Released: 2008-07-15
License: $149.95
Publisher: FabulaTech
Language: English
Platform: Vista, Windows
Requirements: no special
|
| Serial to Ethernet Connector 3.0 |
|
This is software-based solution that lets you share up to 255 serial port devices over TCP/IP network. So, any serial port device connected to COM port could be accessed from anywhere as if it is attached to local PC. It provides the ability to create three different types of connection: Port-to-port, Port-to-TCP client and Port-to-TCP server. Serial to Ethernet Connector uses virtual port technology which emulates real serial ports.
Released: 2005-12-07
License: $99.95
Publisher: ELTIMA Software GmbH
Language: English
Platform: Windows
Requirements: Windows 98 and higher
|
Very good but overpriced My title says it all. The program works excellent, it even has proper handling for CTS/DTR and Carrier Detect.
It also pushes the data throuh at...
Ehhhh not bad. would be more useful if it was cross-platform.
| Advanced Virtual COM Port 2.4 |
|
Advanced Virtual COM Port is the first software of its kind which includes both local and network
virtual COM port functions. It can share your real COM ports or create virtual COM ports and
connect them with a virtual null-modem cable locally or through the network. You can connect to a
shared port and use it just like it is on your machine. Virtual serial ports created by the
program look and work the same way real ones look and work.
Released: 2007-01-05
License: $79.98
Publisher: KernelPro Software
Language: English
Platform: Windows
Requirements: Windows 2000/XP/2003 Server/XP64/Vista, administrator privileges required to install the program
|
| Serial Splitter 3.0 |
|
Serial Splitter is an application, based on Windows kernel drivers technology and Eltima Virtual Serial Ports Driver. It allows you to share real serial port between several applications in a way that all applications will receive same data from one serial port simultaneously. It is achieved by creating virtual serial ports, which are same copies of real ones. Each application will think that it is working with serial port in exclusive mode.
Released: 2005-03-10
License: $99.95
Publisher: ELTIMA Software GmbH
Language: English
Platform: Windows
|
| COM Port Splitter 3.5 |
|
COM Port Splitter was designed to create several virtual copies of a COM-port and to organize complex bundles of COM-ports. COM Port Splitter offers 3 types of port splitting options (one-to-many ports, many-to-one, many-to-many), where serial ports (physical or virtual ones or both kinds at once) are used to form any side of connection. Each virtual port is connected to the real port and has its unique name in the system.
Released: 2006-08-03
License: $99.95
Publisher: Virtual Serial Port Software
Language: English
Platform: Windows
Requirements: Windows 98/Me/NT 4.x/2000/XP/2003
|
| Eltima Serial to Ethernet Connector 5.0 |
|
Allows you to share up to 255 serial port devices over TCP/IP network turning your computer into low-cost terminal server. As the result, any serial port device connected to COM port could be accessed from anywhere in the world as if it is attached to local PC. It provides the ability to create four different types of connection: Port-to-port, Port-to-TCP client, Port-to-TCP server and Port-to-UDP.
Released: 2008-07-08
License: $99.95
Publisher: Virtual Serial Port Software
Language: English
Platform: Vista, Windows
Requirements: Processor: Pentium II class at least 200 MHz; RAM: 64 MB; Disk Space: 3-5 MB
|
| Share Serial Ports 1.0 |
|
Share Serial Ports is an advanced utility for sharing real serial ports between multiple applications so that all applications will receive same data from real serial port simultaneously. It is achieved by creating virtual serial ports, exact copies of real ones. All virtual ports can send data to real serial port. You will be able to set port permissions to read, write or change control lines state for every application separately.
Released: 2004-04-05
License: $111.95
Publisher: ELTIMA Software GmbH
Language: English
Platform: Windows
Requirements: Processor: Pentium II class at least 300 MHz; 128 MB RAM; 3 MB of initial free disk space; Windows 2000/XP compatible platform
|
Dialup Modem disconnect I am trying to connect dial-up using hyper terminal and send data over dialup connection using another application. As soon as I try to send data...
| Eltima Virtual Serial Ports Driver XP 5.1 |
|
Eltima Virtual Serial Ports Driver XP 5.1 enables to create any number of pure virtual serial ports in your system connected into pairs via virtual null-modem cable without using any real serial ports. Virtual Serial Ports appear to operating system or any Windows application as "standard" hardware serial ports. This is helpful for serial software and GPS software developers, telecommunication and data transmission specialists.
Released: 2005-09-09
License: $99.95
Publisher: Virtual Rs232 Software
Language: English
Platform: Windows
Requirements: Windows 98/Me/NT 4.x/2000/XP/2003
|
Works as advertised Very simple to use and with an appropiate feature set. One can go straight to the point.
| Shared Serial Ports 1.1 |
|
Shared Serial Port - advanced utility to share real serial ports between applications so that all applications will receive/send data from/to real serial port simultaneously. Shared Serial Port creates virtual serial ports, which are same copies as real ones. Any virtual serial port will have the same name as the real one and any number of applications will be capable of using it at the same time.
Released: 2004-11-18
License: $111.95
Publisher: ELTIMA Software GmbH
Language: English
Platform: Windows
Requirements: Processor: Pentium II class at least 300 MHz; RAM: 128 MB; 3 MB of initial free disk space
|
| MIDIoverLAN CP 2.2 |
|
MIDIoverLAN CP is unique and easy to use tool which works in Windows XP/Mac OSX providing the mos tMIDI time accuracy possible. MIDIoverLAN CP is the best choice if you want to: Receive/transmit MIDI; events from/to remote computers via TCP/IP network; Synchronize sequencers or play MIDI over local network; Run your favorite softsynths on dedicated computer; Combine the best of all MIDI programs
Released: 2005-02-22
License: $129.00
Publisher: MusicLab, Inc.
Language: English
Platform: Windows, MAC
Requirements: 500 MHz processor, 128 MB RAM, TCP/IP
|
midi integration failure I wanted a virtual device driver that I could interface with....and with your documentation, I could not figure out how to write the receiver-driver....
It was just what I want. It was just what I want, and I think this is the best that a software can have.
Looks good... but... I downloaded the trial version yesterday.. and was pleasantly surprised by how easy it was to set up. My concern as an orcherstral composer with many...
|
Audio & Multimedia
virtual serial port